Complete User Manual Guide for Samsung Xpress M2020W Setup

 Samsung Xpress M2020W is the ultimate monochrome laser printer device in the market. The compact size of the printer make it appropriate for home or office purposes. Using this printer, you can easily streamline the workflow and print up to 20 pages per minute. However, if you have a Samsung Xpress M2020W laser printer and looking for the ways to set it up then don’t panic! You are landed to the right place. In this blog, you will get to know the simple instructions for the Samsung Xpress M2020W Setup. Let’s begin with the setup steps. 

Guidelines for Samsung Xpress M2020W Setup for Mac Operating System

Look at the below steps to setup the Samsung Xpress M2020W monochrome laser printer on your Mac operating system:

Step 1: The first step is to turn on your printer and after that check for the LED light on it whether it is blinking or not. If the LED light starts blinking on it then it means that your printer is turned on.

Step 2: Next, connect the USB cable to the Mac device. It is fitted on the USB port of the system.

Step 3: Once you setup the connection properly, you are required to Run the wireless setting application to access the setup page.

Step 4: Choose an option saying “Using a USB cable” in the wireless setup option. Tap on the Next button to proceed further.

Step 5: Now, you will see that the installation wizard will start searching for the printer and gives its information to you. In acse, your system is unable to find the printer then it will displays “printer not found” message on screen.

Step 6: After the successful connection, tap on the “Network” option. Tap on the Next button.

Step 7: In the next step, you need to enter the security key nearer to the Password block on your screen. The network security key or password can be associated to WPA2/ WEP/ WPA. Hit on the Next button to go ahead. 

Step 8: Wait for some time to make the appropriate connection between the printer and network. 

Step 9: Once the connection has been established succefsully, you will receive information of WiFi direct. Enable the option on the checkbox and tap on the Next button.

Step 10: A pop-up message will displays on the screen saying the connection has been established succefsully. 

Step 11: Hit on the Finish button to complete the setup process.

Step 12: At last, a pop-up message displays on the screen saying Samsung Xpress M2020W Setup is completed successfully. Now, you can both print and scan from your printer whatever you want. 

We hope that this blog will be helpful for you in completing the Samsung Xpress M2020W Setup on your device. Although, if you have query associated to the printer setup then you can reach to our support team through our helpline number or live chat option to resolve the issue in your finger-tips.